NetBackup status code: 1299

Message: The KMS configuration pre-check failed.

Explanation: This error occurs if any of the following conditions is not met:

You should specify either credId or pkiAttributes. Do not specify both at the same time.
One of the following fields is mandatory: credId or pkiAttributes.
The kmsServerAttributes field is mandatory and it cannot be blank.
The certificate is mandatory and it cannot be blank.
The CA Certificate is mandatory and it cannot be blank.
The private key is mandatory and it cannot be blank.
The operation is not supported for the following KMS type: NBKMS.

Recommended Action: Verify the following as needed:

You need to specify either credId or pkiAttributes. Do not specify both at the same time.
Verify that you have one of the following mandatory fields: credId or pkiAttributes.
Verify that the mandatory field kmsServerAttributes is not blank.
Review the certificate. The certificate is mandatory and it cannot be blank.
Review the CA Certificate. The CA Certificate is mandatory and it cannot be blank.
Review the private key. The private key is mandatory and it cannot be blank.
Verify that NBKMS is not used. The operation is not supported for that KMS type.

Click here to view technical notes and other information on the Cohesity Technical Support website about this status code.