To verify that all processes are running on UNIX or Linux servers

1. To see the list of processes (daemons) running on the primary server and on the media server, enter the following command:

   /usr/openv/netbackup/bin/bpps -x

2. Ensure that the following processes are running on the NetBackup servers:

   Primary server

   bpcd -standalone bpcompatd bpdbm bpjobd bprd java nbars nbatd nbdisco (discovery manager) nbemm nbevtmgr nbim (index manager) nbjm

   nbpem nbproxy nbrb nbrmms nbsl nbstserv nbsvcmon nbwmc pbx_exchange postgres vmd vnetd -standalone nbmqbroker

   Media server

   avrd (automatic volume recognition, only if drives are configured 
   on the server)
   bpcd  - standalone
   ltid  (needed only if tape devices are configured on the server)
   mtstrmd (if the system has data deduplication configured)
   nbrmms
   nbsl
   nbsvcmon
   pbx_exchange
   spad (if the system has data deduplication configured)
   spoold (if the system has data deduplication configured)
   vmd  (volume)
   vnetd  - standalone
   Any tape or robotic processes, such as tldd, tldcd
   

   Note:

   Additional processes may also need to be running if other add-on products, database agents, and so forth are installed. For additional assistance, see https://support.cohesity.com/s/article/article-100002166.

3. If either the NetBackup Request Daemon (bprd) or the NetBackup Database Manager Daemon (bpdbm) is not running, start them by entering the following command:

   /usr/openv/netbackup/bin/initbprd

4. If the NetBackup Web Management Console (nbwmc) is not running, start it with the following command:

   /usr/openv/netbackup/bin/nbwmc

5. If any of the media server processes are not running, stop the device process ltid by running the following command:

   /usr/openv/volmgr/bin/stopltid

6. To verify that the ltid, avrd, and robotic control processes are stopped, run the following command:

   /usr/openv/volmgr/bin/vmps

7. If you use ACS robotic control, the acsssi and the acssel processes may continue to run when ltid is terminated. Use the UNIX kill command to individually stop those robotic control processes.
8. Then, start all device processes by running the following command:

   /usr/openv/volmgr/bin/ltid

   For debugging, start ltid with the -v (verbose) option.

9. If necessary, you can use the following to stop and restart all the NetBackup server processes:

   /usr/openv/netbackup/bin/bp.kill_all
   /usr/openv/netbackup/bin/bp.start_all