To inject media for libraries with barcode readers

1. Insert the media into the robotic library slots or media access port.
2. On the left, select Tape storage and then click Robots tab.
3. Select the robotic library where you inserted the volume.
4. Select Inventory robot.
5. In the Inventory operation section, select Update volume configuration.
6. To configure advanced options, click Advanced options.
7. If your robot has a media access port into which you placed the media, select Empty media access port prior to update.
8. Select Start to start the update.
9. Repeat as necessary until all media are injected.

To inject media for libraries without barcode readers

1. Insert the media into the robotic library slots (or into the cartridge and then inject the cartridge into the robot).
2. On the left, select Tape storage and then click Volumes tab.
3. Select the volume to be injected into the library.
4. Select Move.
5. Select or enter the robot, volume group, and slot number.

   Use the First slot number field to enter the slot into which you placed the volume.

6. Select Move to move the volume.
7. Repeat as necessary until all media are injected.