Verifying the device configuration on Linux

The /proc/scsi/scsi file shows all of the devices that the SCSI driver detects.

If the operating system detects the SCSI devices, NetBackup can discover them.

To verify that the operating system can see the devices

Run the following command from a terminal window:

cat /proc/scsi/scsi

The output that is displayed should be similar to the following:

Attached devices:
Host: scsi8 Channel: 00 Id: 05 Lun: 00
  Vendor: IBM      Model: ULT3580-HH8      Rev: HB81
  Type:   Sequential-Access                ANSI  SCSI revision: 06
Host: scsi8 Channel: 00 Id: 05 Lun: 01
  Vendor: IBM      Model: 3573-TL          Rev: 1110
  Type:   Medium Changer                   ANSI  SCSI revision: 05
Host: scsi2 Channel: 00 Id: 01 Lun: 00
  Vendor: IBM      Model: ULT3580-HH7      Rev: H9E3
  Type:   Sequential-Access                ANSI  SCSI revision: 06

Verifying the device configuration on Linux

Feedback

Feedback