NetBackup status code: 8312
Message: The data-in-transit encryption (DTE) mode of the backup image is set to On, but the DTE setting is disabled on the media server.
Explanation: The backup image that is used for secondary operations such as restore, duplication, import, verify, or others, has DTE mode enabled. However, the DTE setting on media server host is disabled. As a result of this issue, multiple NetBackup operations such as backup, restore, duplication, import, or others fail.
Recommended Action: Perform one of the following as appropriate:
Change the NetBackup configuration to select the media server which supports data-in-transit encryption for performing the NetBackup operations.
The media server that handles the secondary operation needs to have the data-in-transit encryption setting enabled. Change the media server DTE setting of the given media server to on using the following command:
nbseccmd -setsecurityconfig -dtemediamode on -mediaserver <media_server_name>If the media server that handles the backup needs to have data-in-transit encryption disabled, change the data-in-transit encryption (DTE) mode of the backup image to Off using the following command:
bpimage -update -image_dtemode Off -id <backup_id>Note:
This option is not applicable for import phase 1.
Set DTE_IGNORE_IMAGE_MODE = ALWAYS in the NetBackup configuration file of the primary server or media server (for import phase 1).
For option 3 and option 4, DTE is disabled while the job is performed.
more information, refer to the Configuring data-in-transit encryption section in the NetBackup Security and Encryption Guide.
Click here to view technical notes and other information on the Cohesity Technical Support website about this status code.