nb_TapeDrive
Table: nb_TapeDrive
OpsCenter Report Column | Description | Equivalent Column in IT Analytics |
|---|---|---|
masterServerId | Specifies primary server ID for the tape drive. | apt_v_nbu_tape_drive.controlling_server_id |
name | Specifies name of the tape drive. | apt_v_nbu_tape_drive.drive_name |
acs | Specifies the ACS library software index that identifies the robot where this drive is located. | apt_v_nbu_tape_drive.robot_drive_index |
cleanFreq | Specifies the cleaning frequency for the drive (in hours).The default frequency is zero. | |
controlHostName | Specifies name of the control host for this drive. | apt_v_nbu_tape_drive.device_name |
cleanFreq | Specifies the cleaning frequency for the drive (in hours).The default frequency is zero. | |
controlHostName | Specifies name of the control host for this drive. | apt_v_nbu_tape_drive.device_name |
controlMode | Specifies control mode of the drive like Down, Operator, AVR and so on, as defined in lookup_ControlMode. | |
drive | Specifies the ACS library software physical number of the drive. | |
driveStatus | Specifies drive status of the tape drive like Up, Down,Mixed as defined in lookup_DriveStatus. | apt_v_nbu_tape_drive.drive_status_name |
evsn | Specifies external media ID of the tape drive. | |
isControlUp | Specifies if the control is Up. | |
isValid | Specifies if the tape drive is valid. 1 means valid; 0 means invalid. | |
lastCleanTime | Specifies the last clean time of the tape drive. | |
localControl | Specifies if the drive has local control. 1 means has local control; 0 means the drive does not have local control. | |
lsm | Specifies the ACS Library Storage Module where this drive is located. | |
mountedTime | Specifies the time when the tape drive was mounted. | apt_v_nbu_tape_media.last_mounted |
ndmp | Specifies if the drive is NDMP drive or not. 1 means NDMP drive; 0 means not an NDMP drive. | |
occupyIndex | Specifies an index that was assigned to the drive during configuration. | |
oprComment | Specifies comments associated with a drive. | |
panel | Specifies the ACS robot panel where this drive islocated. | |
reachable | Specifies the reachable state of the drive like reachable, unreachable, mixed and so on, as defined inlookup_DriveReachableState. | |
ready | Specifies if the drive is ready. 1 means ready; 0 means not ready. | |
reason | Specifies the reason why drive might be in unusable state. | |
requestId | Specifies a system- assigned number that identifies the request. | |
robotType | Specifies the type of robot that contains this drive like TL4, ACS and so on, as defined in lookup_RobotType. | apt_v_nbu_tape_library.library_type |
scanHost | Specifies name of the scan host for this drive. | |
tapeAlert1 | Specifies tape alert if any. | |
tapeAlert2 | Specifies tape alert if any. | |
tapeAlertEnabled | Specifies if tape alert is enabled. 1 means enabled; 0 means disable. | |
totalTime | Specifies the total mount time. | |
userName | Specifies the user Name. | |
vendorDriveName | Specifies vendor drive name. | |
vmHost | Specifies name of the vmHost. | |
volumeHeader | Specifies volume Header. | |
worldWideId | Specifies world Wide Id. | |
writeEnabled | Specifies if write is enabled on tape drive. 1 means enabled; 0 means disabled. |