Adding, modifying, or deleting SNMP settings
When an event takes place, you can configure SNMP traps to be sent. The traps are generated using SNMPv2 version. The community string is set to public for the generated traps. Resiliency Platform 10.4 enables support for IPv6 network. You can configure the SNMP traps using IPv6 address. If you want to receive the SNMP traps from Resiliency Platform, you can configure using the below mentioned steps:
To add, modify, or delete SNMP settings
- Navigate
Settings (menu bar)
Under Product Settings, select Alerts & Notifications > SNMP
To add a new SNMP configuration, select Add SNMP Configuration.
To modify or delete an existing one, right-click it and select Modify or Delete.
- To add or modify SNMP settings, specify the following:
Name
Assign a friendly name.
SNMP Server
Enter the IP address (IPv4 or IPv6) or name of the host where the SNMP trap console is located. Example: Host123.example.com
SNMP Port
Enter the SNMP port number. The default port for the trap is 162.