Adding, modifying, or removing Syslog server
You can configure Veritas Resiliency Platform to share the Resiliency Manager logs with Syslog server using the Resiliency Platform console. You can configure Syslog server using the IPv6 address.
You can add multiple Syslog servers for a data center. But if you want to collect the audit logs on selected servers, then you need to add those to the Resiliency Platform first.
To add, modify, or remove Syslog server
- Navigate
Settings (menu bar)
Under Product Settings, select Alerts & Notifications > Syslog
To add a new Syslog server, select Add Syslog Server.
To modify or delete an existing server, right-click the required server, and select Edit or Remove.
- To add or modify Syslog configuration, specify the following:
Data Center Name
Select the data center whose logs you want to send to the Syslog server.
Disabled for modify operation.
Syslog Server IP / name
Enter the Syslog server IP address (IPv4 or IPv6 ) or the name.
Disabled for modify operation.
Port
Enter the port number.
Log Level
Select the log level from the following.
Critical: To share only the critical logs.
Error: To share error and critical logs.
Warning: To share warning, error, and critical logs.
Informational: To share all the logs.
Send Audit Logs
Select if you want to share audit logs with the Syslog server.
Protocol
UDP is the default protocol.
- Click Next and Finish to save the changes.