To configure the Object Store server

1. Log on to Access Appliance using the Access Appliance command-line interface.
2. You can either use an existing pool or create a default storage pool (at least one) on the cluster.

   You can see the list of existing pools using the storage pool list command.

   You can create a new pool using the storage create pool command.

   storage> pool create pool1 disk1,disk2,disk3,disk4

3. Use the storage pool that was created in Step 2 as the default object access pool.

   You need to set the default pool, as it is required for enabling the Object Store server.

   objectaccess> set pools pool1

   Note:

   Based on your storage requirements, you can configure different types of storage pools by using the Object Store group commands.

4. Verify the configured storage pool.

   objectaccess> show

5. Enable and start the Object Store server.

   objectaccess> server enable

   objectaccess> server start

6. Configure the cluster using any authentication server (AD or LDAP).

   See the following manual pages for more information on configuring AD or LDAP:

   • CLISH> network man ldap

   • CLISH> network man ad

7. Create the access and secret keys for the authorized user, or any user in the authentication server.

   You have two options for creating the access and the secret keys, either using the Access Appliance RESTful APIs or by using the Access Appliance helper script.

   Create the access and secret keys using the Access Appliance RESTful APIs:

   • Before using the Access Appliance RESTful APIs, set the host name resolution for the host as shown in the objectaccess> show output against ADMIN_URL.

   • See the Access Appliance Object Access API Guide on the SORT site for accessing the Object Store server (S3) user management APIs.

   • After creating your access and secret key, you can create a bucket using the S3 API.

   Create the access and the secret keys using the Access Appliance helper script:

   • Add the ADMIN_URL name in your /etc/hosts file.

     Where the ADMIN_URL is admin.<cluster_name> and the port is 8144. This url should point to the Access Appliance management console IP address.

   • Location of the helper script: /opt/VRTSnas/scripts/utils/objectaccess/objectaccess_client.py

   • The Access Appliance helper script can be used from any client system that has Python installed.

   • To run the script, your S3 client needs to have the argparse and requests Python modules.

     If these modules are missing, install both these modules using pip or easy_install.

   • If the Object Store server is enabled without the SSL option, you need to add the --insecure option.

     clus_01 ~# ./objectaccess_client.py --server 
     admin.clus:8144 --username <uname> --create_key --insecure

   • Create the access and the secret key using the Access Appliance helper script by providing the username, password, and ADMIN_URL (check the online Help of the Access Appliance helper script for all of the provided operations like list key and delete key).

     Create a secret key:

     clus_01:~ # ./objectaccess_client.py --create_key 
     --server admin.clus:8144 --username localuser1 --password root123 
     --insecure
     UserName                : localuser1
     AccessKeyId             : Y2FkODU2NTU2MjVhYzV
     Status                  : Active
     SecretAccessKey         : ODk0YzQxMDhkMmRjM2M5OTUzNjI5OWIzMDgyNzY

     The <localuser1> is the local user created on both the Access Appliance cluster nodes with same unique ID.

     List a secret key for the specified user:

     clus_01:~ # ./objectaccess_client.py --list_key --server 
     admin.clus:8144 --username localuser2 --password root123 --insecure

     Delete a secret key for the specified user:

     clus_01:~ # ./objectaccess_client.py --delete_key 
     ZTkyNDdjZTViM2EyMWZ --server admin.clus:8144 --username localuser2 
     --password root123 --insecure

8. Use the following objectaccess command to see all the existing access and secret keys in the Access Appliance cluster:

   objectaccess> account user show