Installing the storage shelf into a rack
The storage shelf should be installed from the front of the rack with the control panel on the left side of the shelf.
Warning:
The hardware must be powered on in the expected order. Else, all the storage may not be seen by the appliance.
To install a storage shelf
- Use two people to lift the storage shelf.
- Slide the rear of the shelf into the front of the rails. Be sure that the shelf is straight and even inside the rack. Do not force the shelf to fit.
- Carefully push the shelf towards the rear of the rails.
- Remove the cap from the left and the right sides of the front of the shelf, if they are attached.
- Insert one screw into the front of the rack, on both sides of the shelf.
- Replace the end caps or attach the bezel to the front of the shelf.
