Broadcom P225p 10/25Gb PCIe Ethernet card
The Broadcom® BCM957414A4142CC is a dual-port 25 Gb/s, PCI-Express Gen3 x8 Network Interface Card that supports both SFP28/SFP+ optical modules and copper direct attach cable. The card uses the Broadcom BCM57414 25GbE MAC controller with the integrated dual channel 25GbE SFI transceiver.
Note:
Cohesity recommends that you use Finisar FTLX8574D3BCV SFP part for 10G connectivity and Finisar FTLF8536P5PCV SFP part for 25G connectivity.
Note:
The Broadcom P225p 10/25Gb PCIe Ethernet card does not support the installation of a 10G SFP and 25G SFP within the same card. You must either have SFPs with the same maximum speed on both ports at any given time or remove the unused SFP from the card.
Table: Broadcom P225p NIC adapter specifications
Item | Specification |
|---|---|
Bracket height | Full height |
Power consumption | Typical: 12.5 watts Maximum: 12.9 watts |
Operating temperature | 0°C to 55°C (32 F to 131 F) |
Storage temperature | -40°C to +70°C (-40°F to +158°F) |
Storage humidity | 90% at 35°C |
System interface type | PCIe v3.0 |
Speed and slot width | 8.0 GT/s (gigatransfers per second), 8-Lane |
Data rate supported per port | 10/25Gb |
Air Flow (minimum) | 150 LFM (linear feet per minute) |