About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
This section describes the rear components of the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf.
The 5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf contain the following removable rear components:
SAS-3 RAID Controllers (5U84 Primary Storage Shelf only)
Expansion I/O modules (5U84 Expansion Storage Shelf only)
Fan modules
Power Supply Units (PSUs)
Table: 5U84 Primary Storage Shelf rear component locations
Letter | Item |
|---|---|
A | RAID Controllers (from left to right) RAID Controller A, RAID Controller B |
B | Fan modules (from left to right) Fan Module 0, Fan Module 1, Fan Module 2, Fan Module 3, and Fan Module 4 |
C | Power Supply Units (from left to right) PSU 0, PSU 1 |
Table: 5U84 Expansion Storage Shelf rear component locations
Letter | Item |
|---|---|
A | Expansion I/O modules (from left to right) Expansion I/O Module A, Expansion I/O Module B |
B | Fan modules (from left to right) Fan Module 0, Fan Module 1, Fan Module 2, Fan Module 3, and Fan Module 4 |
C | Power Supply Units (from left to right) PSU 0, PSU 1 |
Five high performance fan modules connect to the storage shelf's midplane connector through the middle slots. Each fan module contains two contra-rotating high performance fans, along with separate power and control circuits for each internal fan.
Two redundant Power Supply Units (PSUs) are located in slots beneath the fan modules.
To operate, the 5U84 Primary Storage Shelf must have at least one functioning RAID controller, one functioning power supply unit, and four functioning fan modules.
The 5U84 Expansion Storage Shelf uses two Expansion I/O modules, which are located in the top two slots of the back panel. The Expansion I/O modules provide SAS-3 I/O data transfers between the 5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf. The Expansion I/O modules also provide I/O data transfers between the first 5U84 Expansion Storage Shelf and up to two additional 5U84 Expansion Storage Shelves.
SAS-3 cables connect the 5U84 Expansion Storage Shelf to the 5U84 Primary Storage Shelf through the 5U84 Expansion Storage Shelf's Expansion I/O modules. SAS-3 cables are also used to daisy chain up to two additional 5U84 Expansion Storage Shelves to the first 5U84 Expansion Storage Shelf.
Five high performance fan modules connect to the storage shelf's midplane connector through the middle slots. Each fan module contains two contra-rotating, high performance fans, along with separate power and control circuits for each internal fan. The device must have at least one functioning RAID controller, one functioning power supply module, and one functioning fan module.
Two redundant Power Supply Units (PSUs) are located in slots beneath the fan modules.
To operate, the 5U84 Expansion Storage Shelf must have at least one functioning Expansion I/O module, one functioning PSU, and four functioning fan modules.